Extel VisioSmart 720303 Guide D'installation Et D'utilisation page 54

G. Launch the application and press add camera then "search".
The camera ID is displayed
(Please note: the smartphone must be connected to the same network as the intercom). If
the camera is not displayed, enter the information manually (DID number on the back of the
intercom panel).
Enter a name and the default security code 123456 and "Save".
You can now view the intercom video from your screen.
Click on the image if you want to monitor the live feed. Follow the instructions to change the default security code.
H. Click the icon, then the gear , then next.
Enter the default administrator code 123456 and follow the instructions to customise it.
Note:
This admin code will be requested when you wish to gain access (strike plate or gate motor) remotely.
In Advanced settings, go to "WiFi", then select the network (your router) to which your intercom panel will be
connected. Enter the WiFi network password.
CFI EXTEL - VISIOSMART - 09/2017
GB5