Changing The Mw Channel Step For Use In Foreign Countries - Sony ICF-SW1000T Mode D'emploi

Changing the MW channel step for use in
foreign countries
The channel step differs depending on the
area to match the frequency allocation system
of the country. Change the MW channel step
as necessary.
North and South American countries:
10 kHz
Japan, Europe, and other countries:
9 kHz
Notes
• When you have entered
the wrong MW channel
step in step 3, press
DIRECT to cancel the
current entry and enter
the correct value.
• "TRY AGAIN!" flashes
when the MW channel
step entered is invalid
(i.e., not 9 or 1 and 0).
Repeat from step 2
again.
• Complete each button
operation in steps 2 to 4
within 10 seconds. If
the clock display
returns, repeat from
step 2 again.
1
Turn off the radio.
2
Press DIRECT.
AM
3
Press the numeric buttons (1, 9 and 0) to enter the
desired MW channel step (9 or 1 and 0).
4
Press EXE.
AM
The MW channel step flashes for about 3 seconds and
then the clock display returns.
1 2 3
4 5 6
7 8 9
0
DIRECT EXE
kHz
FWD
kHz
FWD
19 EN
Radio