Remote Control; Timer Programming - Qlima P 126 Manuel D'utilisation

a
b
c
c
d
e g
f
4
76
TO SWITCH ON THE UNIT AT A CERTAIN TIME
• Ensure that the unit is set in the required operating mode
• Switch off the unit by pressing the
properly inserted into the wall outlet.
• Press the -button. The light "Timer set" will flash.
• Use the and
• When the set time has expired the unit will switch on.
G
NOTE!
TO SWITCH OFF THE UNIT AT A CERTAIN TIME
The compressor has been set so that it starts functioning three minutes
• When the unit is operating in the required mode press the -button. The
after the (re)start of the air conditioner.
light "Timer set" will flash.
The cooling will switch off when the room temperature is lower than
• Use the and
the set one. Air circulation will however continue to work on the set
• When the set time has expired the unit will switch off.
level. When the room temperature rises above the selected value, the
cooling will work again.

REMOTE CONTROL

a. LCD Screen
b. Power on/off button
c. Timer and thermostat setting buttons
d. Mode button (select A/C, Fan or Dehumidifier)
e. A/C Fan Speed button (High, Medium, Low)
f. Timer ON / OFF button
g. Celsius / Fahrenheit selector
The remote control works in combination with the control panel. Aim the front
end of the remote control at the red window. The maximum operating distance
from the air conditioner is approximately 5 metres. Place 2 pieces of AAA Batteries
before use.

TIMER PROGRAMMING

1 Press the button
control panel to
2 Press the or buttons on the remote or the
control panel to set the desired shut-off period.
3 The unit will shut off when the set time elapses.
-button. Ensure that the plug is
buttons to set a time between 1 and 24 hours.
buttons to set a time between 1 and 12 hours.
on the remote or the "Timer Setting" button on the
turn on the Timer Function.
, of .
or buttons on the