Cd/Cd-R/Cd-Rw And Usb Storage Devices; Basic Operations; Displaying Text Information - Pioneer DEH-3200UB Mode D'emploi

Masquer les pouces Voir aussi pour DEH-3200UB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating this unit
Local (local seek tuning)
Local seek tuning lets you tune in only those radio sta-
tions with sufficiently strong signals for good recep-
tion.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
FM: OFF—Level1—Level2—Level3—Level4
AM: OFF—Level1—Level2
Larger setting number is higher level. The highest
level setting allows reception of only the strongest
stations, while lower settings let you receive pro-
gressively weaker stations.
3 Press M.C. to confirm the selection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
CD/CD-R/CD-RW and USB
storage devices

Basic Operations

Playing a CD/CD-R/CD-RW
1 Insert the disc, label side up, into the disc loading
slot.
1 If a disc has already been inserted, press SRC/
OFF to select the built-in CD player.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Open the USB connector cover.
2 Plug in the USB storage device using a USB
cable.
Stop playing a USB storage device
1 You may disconnect the USB storage device at
anytime.
Selecting a folder
1 Push M.C. up or down.
Selecting a track
1 Push M.C. left or right.
Fast forwarding or reversing
1 Push and hold M.C. left or right.
Returning to root folder
1 Press and hold BAND/ESC.
Switching between compressed audio and CD-DA
1 Press BAND/ESC.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! USB portable audio players that can be
charged via USB will be recharged when
plugged in and the ignition switch is set to
ACC or ON.
! Disconnect USB storage device from unit
when not in use.
! If plug and play is on and a USB storage de-
vice is present, depending on the type of de-
vice, the source may switch to USB
automatically when you turn on the engine.
Please change plug and play setting as neces-
sary. Refer to USB PnP (plug and play) on page
15.

Displaying text information

Selecting the desired text information
1 Press
/DISP/SCRL.
CD TEXT discs: Track number and play time—
disc title—disc artist name—track title—track ar-
tist name
WMA/MP3/AAC: Play time—folder name—file
name—track title—artist name—album title—
genre—comment—bit rate—folder and track
numbers
WAV: Play time—folder name—file name—track
title—artist name—album title—genre—com-
ment—sampling frequency—folder and track
numbers
Scrolling the text information to the left
1 Press and hold
/DISP/SCRL.
Notes
! Incompatible text stored with the audio file
may not be displayed or may be displayed in-
correctly.
! Depending on the version of iTunes used to
write MP3/AAC files onto a disc, comment in-
formation may be incorrectly displayed.
Section
02
9
En

Publicité

Table des Matières
loading

Table des Matières