Toyota PZ420-I0291-ME Mode D'emploi page 23

π
Add contact list entries using Bluetooth®
You can quickly transfer numbers from your handset device's phonebook using
Bluetooth® to the hands-free system.
1 Press the Multi-function button.
The system responds: Phone menu. {Say a command}.
2 Say Contact List.
The system responds: Contact list. {Say a command}.
3 Say Add Phone Contact.
The system disconnects your handset device and responds: Add phone contact, and is
ready to receive contacts using Bluetooth® from your handset device. In addition, the
Multi-Function button flashes blue slowly to indicate that the hands-free system is
waiting for contacts to be sent from your handset device.
4 Select the contact(s) on your handset device and send them using Bluetooth® to your
Toyota Hands-free System.
ó
Note: Refer to your handset device's user's guide for more details on how to transfer
contacts using Bluetooth®.
5 If prompted by the handset device, enter the passkey 0000, and press the OK key.
When the contact is received by the hands-free system, the system responds by
reading out the contact number as follows: <contact number #1> Yes or No?
6 Say Yes to accept the number (or say No to reject the number and go to the next
number/contact if one exists).
If the number is accepted, the system responds: Say the name
7 Say the name of the contact to be stored (for example, Mark's Mobile).
— if an error is detected, the hands-free system asks you to try again
— if it accepts the name, the system responds: Contact <name> added.
8 If the sent contact has another number, the system responds: <contact number #2>
Yes or No?.
Simply repeat steps 6 and 7.
9 If more than one contact is transferred, the system responds: Next contact. <contact
number #3> Yes or No?. Simply repeat steps 6 and 7.
Once all the sent contact numbers are processed, the system responds: Would you like
to add another contact?
10 Say Yes to add another contact using Bluetooth® (or No to exit Add Phone Contact
mode).
The system responds: Add phone contact and is ready to receive the next contact
(or Goodbye and automatically reconnects your handset device).
11 At any time, you can exit Add Phone Contact mode by pressing the End button.
The system responds: Goodbye and automatically reconnects your handset device.
ó
Note: To speed up adding multiple contacts, the hands-free system does not prompt
for another contact (see step 9) in Expert Mode. The hands-free system automatically
responds: Add phone contact and is ready to receive the next contact while the Multi-
Function button remains flashing. Press the End button to exit at any time.
22 Bluetooth® hands-free system
A