Fitting The Carrying Eye; Mounting The Deflector - Stihl FS 120 Notice D'emploi

English
2
1
:
Press down the trigger interlock (1)
and squeeze the throttle trigger (2)
(full throttle) – this sets the throttle
cable correctly.
24

Fitting the Carrying Eye*

1
1
2
:
For position of carrying eye see
"Parts and Controls"
:
Place the clamp (1) with the
tapped hole on the left-hand side
of the drive tube.
:
Squeeze the two ends of the clamp
together and hold in that position.
:
Insert M 6 x 14 screw (2).
:
Line up the carrying eye.
:
Tighten down the screw firmly.
* see "Guide to Using this Manual"

Mounting the Deflector

1
3
2
3
Mounting the deflector
1 = Deflector approved for all cutting
tools
2 = Deflector approved for use with
mowing heads only
:
Place the deflector on the
gearhead.
:
Fit the plate (3) and line it up.
:
Insert M 5 x 18 screws and tighten
down firmly.
FS 120, FS 200, FS 250