Adjusting The Loop Handle; Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl FSA 56 Notice D'emploi

English
1
2
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
8.2

Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and remove the battery.
► Loosen the star knob nut (1).
► Swing the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
44
2
1

9 Removing and Fitting the Battery

9.1

Fitting the Battery

2
1
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the trimmer and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the trimmer's housing.
9.2

Removing the Battery

► Stand the trimmer on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery does not fall out.
9 Removing and Fitting the Battery
3
0458-713-9621-B