Fitting The Full Harness - Stihl FS 260 C Notice D'emploi

Grip the cap – it is properly locked if
N
it cannot be turned or removed.
If tank cap with hinged grip can be
turned or removed
Bottom of cap is twisted in relation to
top:
Left: Bottom of cap twisted
Right: Bottom of cap correctly
positioned
FS 260 C, FS 360 C
Place the cap on the opening and
N
rotate it counterclockwise until it
engages the filler neck.
Continue rotating the cap
N
counterclockwise (about a quarter
turn) – this causes the bottom of the
cap to be turned to the correct
position.
Turn and lock the cap clockwise –
N
see sections on "Closing" and
"Checking security of cap".

Fitting the Full Harness

Fitting the full harness is described in
detail in the instruction sheet supplied.
FS 260 C
1
2
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the machine – see
N
"Balancing the Machine".
English
25