3.
Load laundry into washer
Load garments in loose heaps evenly
around the washplate. Do not load
garments directly over the center
of the washplate; when loaded, the
center of the washplate should be
visible. Try mixing different sized
garments to reduce tangling.
IMPORTANT: Garments need to move freely for best cleaning
and to reduce wrinkling and tangling.
4.
Add liquid chlorine bleach
to dispenser, if desired
Liquid
Chlorine Bleach
Do not overfill, dilute, or use more than 1 cup (250 mL). Do
not use color-safe bleach or Oxi products in the same cycle
with liquid chlorine bleach.
8
5.
Add fabric softener, if desired
This washer has been designed to allow
the use of the Downy Ball
®
fabric softener in the rinse cycle. Pour a
measured amount of Downy
Downy Ball
, pull the ring tightly to seal it, and place on top
®
of load. Always follow manufacturer's directions for correct
amount of fabric softener based on your load size. Then
select Fabric Softener Added-Yes option. The Downy Ball
will automatically release the fabric softener during the
rinse cycle. For questions on using the Downy Ball
1-800-688-7638 or visit www.downy.com.
IMPORTANT: Fabric Softener Added option must be selected
to "Yes" to ensure proper distribution at correct time in cycle.
Do not overfill or dilute.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed
filling, press the START/Pause/Unlock button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not allow liquid fabric
softener to spill, splash, drip, or run into the basket or on load.
Do not use more than the recommended amount. Close the lid
and press the START/Pause/Unlock button again to start the
washer.
IMPORTANT: Fabric Softener Added option must be selected
to "Yes" to ensure proper distribution of the fabric softener
during the rinse portion of the cycle.
6.
Select cycle
Turn cycle knob to choose your wash cycle.
to dispense
liquid fabric softener into the
®
call
®
®