Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Functional Problems
The lab mains adapter does not work, the displays are not lit.
• Check the on/off switch.
• Check that the low-power connection plug is connected to the mains socket (16) at the rear of the device correctly.
• Check the functional safety of the mains connection (mains sockets, fuses, circuit breakers, etc.).
• Verify that the correct mains voltage is applied.
The connected consumers do not work.
• Connect the polarity of the connection sockets (7 and 9).
• Check if current limitation is active.
• Reduce load placed on the lab mains adapter by the consumers.
• Check the technical data of the consumers.
11. Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
26
Publicité
Chapitres
Table des Matières
