Safety Information - BASETech BT-305 Notice D'emploi

6. Safety Information


The guarantee/warranty will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper use
or non-compliance with the safety information! In such cases the warranty/guarantee will expire.
Dear Customer,
this safety information serves not only to protect the product, but also your own safety and the safety of
other persons. Therefore, read this chapter very carefully before taking the product into operation!
This lab mains adapter left the manufacturer's factory in a safe and perfect condition.
To maintain this condition and ensure safe operation, the user must observe the safety information and
warning notes in these operating instructions.
• The unauthorized conversion and/or modification of the product is prohibited for safety and approval
reasons (CE).
• The lab mains adapter corresponds to protection category I. It is only approved for connection to an
earthed mains socket (230 V/50 Hz). Ensure that the earth connection is not defective/interrupted. It
would pose fatal danger in case of malfunction.
• The product is not a toy and must be kept out of the reach of children.
Children cannot judge the dangers involved when handling electrical devices. Children may also change
settings or push objects into the mains adapter's ventilation slits. There is danger to life from electric
shock! Therefore, always operate the product out of the reach of children.
• The lab mains adapter must only be set up and operated in dry, closed indoor rooms. It must not become
damp or wet. The mains adapter also must not be exposed to extreme temperatures, direct sunlight,
vibration or mechanical stress.
• Only operate the lab mains adapter in moderate climate, never in tropical climate. For more information
on acceptable environmental conditions, see the chapter "Technical Data".
• Choose a solid, flat, clean and sufficiently large surface for the lab mains adapter.
• Do not use any open fire in direct proximity to the lab mains adapter and do not place any containers with
liquids on or next to the lab mains adapter.
• If the lab mains adapter is taken from a cold into a warm room, condensation may form. This poses a risk
of potentially fatal electrical shock. Therefore, allow the lab mains adapter to reach room temperature
before connecting it to mains voltage or operating it.
• Before taking the lab mains adapter into operation and during operation, ensure that your hands, shoes,
clothes, the floor and the device itself are dry.
• Disconnect the lab mains adapter's mains plug from the mains socket during thunderstorms to prevent
damage from overvoltage.
• Ensure that the insulation of the lab mains adapter, the safety sockets, connected cables and mains cable
are not damaged or destroyed. Do not use blank metal conductors.
19