Handle Installation; Control Panel - Danby Designer DUF140E1WDD Manuel Du Propriétaire

OPERATING INSTRUCTIONS

HANDLE INSTALLATION

The appliance ships with the handle inside the
cabinet. It must be installed by the end user. The
appliance should be unplugged before installing the
handle.
1. Install two screws into the pre-drilled door holes
and turn them until they cannot be tightened
further.
2. Position the handle over the screws.
3. Install two screws into the holes on the side
of the handle and turn until they cannot be
tightened further.

CONTROL PANEL

The control panel is located on the front of the door
of the appliance.
• Indicators
1. High temperature alarm
2. Open door alarm
• Buttons
A. Up and Down buttons
B. Quick freeze button
C. Lock button
D. Freezer / Refrigerator button
1
B
C
D
4
2
A