Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
LEVELLING LEGS
If the appliance is not level, the door and seal may not function correctly, causing the appliance
to operate ineffi ciently. To level the appliance turn the levelling leg(s) clockwise to rise or counter-
clockwise to lower.
HANDLE INSTALLATION
The appliance must be unplugged before installing the handle.
1. Take 2 screws and install them in the pre-drilled door holes, be sure to turn them until they cannot
be further tightened.
2. Position the handle over the screws.
3. Put the other set of handle screws in the hole on the side of the handle and turn until they are fully
tightened.
5
Publicité
Table des Matières
