Operation - iComfort ic2000 Manuel D'utilisation

Control panel

8. OPERATION

We recommend adjusting the chair angle before powering up the chair.
Then, press on the power On/Off
massage mode you prefer. There are three automatic massage modes. You can interrupt the automatic
massage mode at any point by shutting off the unit. The massage chair will then return to its original
position.
If you prefer to use the manual massage mode, you can choose the type of massage you want.
(knead, tap, knead & tap, heat, etc.) The massage chair will then use the massage mode you have
chosen. You can press on the power
back to its original position and shut off.
Automatic massage modes
Press one the Automatic massage
three modes:
i. Auto mode I: Whole body massage. All the massage features will be activated.
ii. Auto mode II: The massage will focus on the neck and back.
iii. Auto mode III: The massage will focus on the waist, buttocks, and thighs.
iv. Demo mode: A whole-body massage is activated but will only last five minutes.
button to activate the massage chair.
button again at any time and the massage chair will come
mode button. Pressing repeatedly will activate one of
You can choose the