Components; Operation - iComfort IC1118 Manuel De L'utilisateur

8. COMPONENTS

9. OPERATION

First, adjust the massage chair angle. Then, press on the power button to start massage.
will scan the length of your back and width of your shoulders. We recommend adjusting the chair
angle before powering up the chair. This way, the body measurements will be done correctly. Once
done (about 20 seconds), the automatic massage mode (mode A) will start. You can press on the
'Mode button repeatedly to choose another automatic massage mode. There are four modes (A,B,C
and D). These massage modes will go through most of the massage techniques available with this chair.
After the massage is done, the chair will return to its original position. You can interrupt the massage at
any point by shutting off the unit. The massage chair will then return to its original position.
If you prefer, you can also adjust a preferred shoulder positions. After pressing on the power on
button, press on the
also choose a massage area. The automatic mode will then concentrate on this area. Press one of the
three buttons to choose which area of your back you want the massage done (Upper body, Neck
shoulder or Waist back). The massage chair will go through its multiple massage modes for about 15
minutes.
'Adjusting shoulder first' button. There are five choices (from low to high). You can
P a g e | 5
The ic1118