Operation; Automatic Mode - iComfort ic0906 Manuel De L'utilisateur

8. operation

position the icomfort massager in a stable place and connect it to an ac wall outlet.
press the "on" switch. the power light will go on and the massage session will start at
the speed/intensity level 1. the Window display will switch to calorie count after a few
seconds when the above is selected. you can then choose an automatic massage mode
or adjust the foot massager manually.

8. 1. automatic mode

press the select button repeatedly to choose one of the 4 preset automatic massage
modes (vitality, relaxation, reflexology and active). an indicator light will light up to
confirm the selected mode. While using any of the automatic massage modes, you may
check the number of minutes left by pressing the timer button on the unit or on the
remote control.
the programmed massage length, speed and heat setting should vary according to your
health. We recommend starting using the icomfort massager slowly and progressively as
you get use to the unit more and more.
Vitality mode
• press the blue button on the wireless control or the select button on the unit
to activate this mode
• the vibration speed will fluctuate from levels 1 to15 with infrared heat levels
from 1 to 8.
Relaxation mode
• press the green button on the wireless control or the select button on the unit
to activate this mode
• the vibration speed will fluctuate from levels 1 to 4 and infrared heat levels
from 1 to 3.
Reflexology mode
• press the red button on the wireless control or the select button on the unit
to activate this mode
• the vibration speed will fluctuate quickly from levels 1 to 15 and infrared heat
levels from 1 to 8.
5