Sangean PR-D3 Mode D'emploi page 14

Memory Tuning
Five stations may be stored in memory in each band.
. Tune to the station you want to memorize.
2. Press and hold the desired Preset Button until you hear a beep.
The station or channel is then memorized. The display will show
the preset number.
To recall the preset station, select the correct band and briefly
press and release the Preset Button. The radio will instantly tune to
the station stored in memory.
Note:
Your radio automatically fine tunes the Twin Coil Ferrite® AM
Antenna for a few seconds after a station is changed in AM mode.
The "signal" icon will flash during this time.
Note:
To see time or frequency on the screen, press the Display button.
Antenna setup for AM reception
The radio comes with built-in AM antenna which should be enough
for normal listening. To improve the AM reception, you may connect
the outdoor AM antenna with AM external antenna terminal.
GB
3