Sangean PR-D3 Mode D'emploi page 11

3. Now the minute digit will flash on the display. Press the Tuning
up/down button to adjust the required minute. Then press the
Alarm button again to complete the alarm setting. Once the alarm
is set, it will automatically go off the next day at the same time.
Note:
● If the radio alarm is selected, tune the radio to your favorite station
and set the volume before turning your radio off for the day. When
the alarm activates, the radio will play the last station listened to.
● The buzzer alarm is called HWS or Humane Wake System. The
alarm tone beep will increase in volume every 5 seconds for one
minute followed by one minute of silence before repeating the
cycle.
Turning off the sounding alarm
Press the Power button to turn off the sounding alarm, otherwise,
the alarm will sound for an hour.
Cancelling the alarm setting
Press and hold the Alarm button until you hear a beep and the
alarm symbol will disappear on the display.
0