Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AVOID THE FOLLOWING PLACES FOR INSTALLATION:
•
Do not install the CO-detector in the turbulent air created by ceiling fans.
•
Do not install the CO-detector near vents with fresh air.
•
Do not install the CO-detector near doors and windows leading outdoors.
•
Do not install the CO-detector near extremely dusty, dirty or greasy spaces such as heating spaces <4m³ or
pantries. Dust, grease and household chemicals can affect the sensor.
•
Install the CO detector at least 0.5 meters away from gas discharge lamps (halogen) because of electronic
interferences that can lead to false alarms.
•
Do not install the CO detector in humid and wet spaces, such as the bathroom.
•
Do not install the CO detector in a location where the temperature is lower than -10°C or warmer than +45°C.
•
Do not install the CO detector in a place where the humidity is higher than 93%RH.
•
Never install the CO detector behind curtains or furniture. Carbon monoxide must be able to reach the sensor
to ensure the sensor can properly detect carbon monoxide levels.
•
Never install the CO detector flat on a table or similar surface.
•
Never install the CO detector in spaces where spray cans may be used (hair spray, deodorant)
Not behind
a closet
Not behind
a curtain
39
Not near an
air vent
Publicité
Table des Matières
