Indoor Unit; Outdoor Unit; Controller Interface - Mitsubishi Electric MSY-TP35VF Notice D'utilisation

N
AME OF EACH PART

Indoor unit

Front
panel
Air fi lter
Horizontal vane
Air outlet
Heat exchanger
Spec name plate *1
Remote control receiving section
Operation indicator lamp
Emergency operation switch
Wired remote controller (OPTION) Wired remote controllers may be different appearance.

Controller interface

4 3 2
Function buttons
7 8
▌1 [OFF/ON] button
Press to turn OFF/ON the indoor unit.
▌2 [SELECT] button
Press to save the setting.
▌3 [RETURN] button
Press to return to the previous screen.
▌4 [MENU] button
Press to bring up the Main menu.
▌5 Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on and it will
stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on and does
not perform its function. (except for the [OFF/ON] button)
Air inlet
Emergency
operation
switch *2
When the remote controller cannot be used...
*2
Emergency operation can be activated by pressing the emergency operation switch (E.O. SW) on
the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
5
6
1
9 0

Outdoor unit

Outdoor units may be different in appearance.
*1 The manufacturing year and month is indicated on the spec name plate.
Emergency
COOL Stop
Note:
As for the remote controller which is different in appear-
ance, refer to the operation manual included with the re-
mote controller.
The functions of the function buttons change depending on the screen.
Refer to the button function guide that appears at the bottom of the LCD for the
functions they serve on a given screen.
When the system is centrally controlled, the button function guide that corresponds
to the locked button will not appear.
Main display
Room
Cool Set temp.
Mode Temp.
7 8 9
▌6 OFF/ON lamp
This lamp lights up in green while the unit is in operation. It blinks while the
remote controller is starting up or when there is an error.
▌7 Function button [F1]
Main display: Press to change the operation mode.
Main menu: Press to move the cursor down.
▌8 Function button [F2]
Main display: Press to decrease temperature.
Main menu: Press to move the cursor up.
▌9 Function button [F3]
Main display: Press to increase temperature.
Main menu: Press to go to the previous page.
▌0 Function button [F4]
Main display: Press to change the fan speed.
Main menu: Press to go to the next page.
Air inlet (back and side)
Spec name plate *1
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
Set temperature : 24°C
: Lit
Fan speed : Medium
: Not lit
Horizontal vane : Auto
Main menu
Fri
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Auto Weekly timer
OU silent mode
Main display:
Cursor Page
Fan
0 7 8 9
Function guide
EN
0
EN-3