ensto One Guide D'utilisation page 5

9. Charging with RFID
You need an RFID tag which has a permission to access the charger.
Start Charging with RFID
Stop Charging with RFID
Plug the charging cable to your electric vehicle.
1
Plug the charging cable to the charger
(models with a separate charging cable).
Charging event starts.
3
• The LED indicator turns to stable blue.
Unplug the charging cable from the charger
5
(models with a separate charging cable).
Unplug the charging cable from your electric vehicle.
RAK137 / 15.3.2021
Show the RFID tag to the RFID reading
2
area.
While the RFID tag is read, the LED indi-
cator flashes green and verifies the user
permission to charge.
• If the user authorization is rejected,
the LED indicator flashes red.
• If the user authorization is accept-
ed, the indicator light turns to wav-
ing green.
Show the RFID tag to the RFID reading
4
area.
Charging event ends.
• The LED indicator turns to waving
green.
5 / 32