ensto One Guide D'utilisation page 3

3. Intended use
• The charger is intended for charging electric vehicles, both plug-in hybrids and full battery
electric vehicles.
• Do not connect to the charger other devices, such as power tools.
• Use the domestic socket only for car heating or household appliances (e.g. vacuum clean-
er).
4. EVH161-A2RMD - Domestic socket
EVH161-A2RMD is provided with a domestic socket.
• Use the domestic socket only for car heating or household appliances.
Do not use the domestic socket to charge an electric vehicle!
• You can start using the domestic socket without RFID authentification.
• You can use the domestic socket if:
The charging cable is not connected to the charger.
The timer is set to "ON" position.
• The kWh usage of each domestic socket transaction is forwarded to EV Manager.
Note! If you connect the charging cable to the charger while you use the domestic socket, the
transaction ends immediately.
5. EVH161-A2RMD - Timer
EVH161-A2RMD is provided with a 24 hour timer switch to control e.g. car
heating.
4
3
2h
ON
23
6. Fixed charging cable
EVH161-ACRM0 and EVH321-ACRM0 are
equipped with a fixed charging cable.
Time setting:
Set the number of hours until departure
Operating time: 2 hours
RAK137 / 15.3.2021
Lift the plug upwards to
1
release it from the hook
inside the holder.
Pull the plug
2
outwards.
3 / 32