ensto One Guide D'utilisation page 4

7. User Interfaces
LED indicator lights will show the status of the charger as described below:
Charger status
The charger is free and ready to use
RFID read, authorization ongoing
Charging authorization rejected
Authorization accepted, charging allowed
While you connect the charging cable
Your vehicle is connected, charging has not started
Your vehicle is connected, charging starts
Charging ongoing
Error state
Internal maintenance of the charger is ongoing.
Do not switch off the power or use the charger during
maintenance.
8. Free Charging
4 / 32
Start charging
When the charger is free and the LED indicator shows green, you can
start a charging event.
Plug in your electric vehicle.
1
The LED indicator turns to stable blue.
Stop charging
Unplug your electric vehicle.
2
After you have unplugged the charger is free for the next user.
RAK137 / 15.3.2021
LED light LED operation
Green Stable
Green Flashing
Red Flashing
Green Waving
Flashing
Green
twice
Green Waving
Blue Waving
Blue Stable
Red Stable
Yellow Stable