Troubleshooting; Compatible Accessories; Ce Declaration Of Conformity - KLEIN+HUMMEL PAS 100 Mode D'emploi

Troubleshooting

Issue
Battery Not Charging (no
blinking bar graph)
No Sound
Distorted Sound
Doesn't Sound Good
AC Light Not Glowing Red

Compatible Accessories

PC 100
LRR 100
CDP3
Sennheiser Evolution

CE Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directives 89/336/EC and
73/23/EC. The declaration is available on the internet site at www.klein-hummel.com. Before putting the device into
operation, please observe the respective country-
specific regulations!
PAS 100 Operating Manual
Possible Causes
Power cable not plugged in or no power at outlet. (The red AC light indicates when the
unit is plugged into a hot power outlet.)
Power switch not turned on. Input level knob turned down. Master Volume turned down.
Battery dead and not plugged into AC power.
When red Input Overload light is flashing turn down the Input level knob.
Check to be sure the Tone Control knobs for Bass, Mid and Treble are set to their center
(detent) position.
Power cable not plugged in or no power at outlet. Check the fuse in the speaker next to
the AC cord plug.
Durable heavy duty cover designed to protect the PAS during transport and operation.
Wire frame luggage trolley suitable for transporting the PAS 100.
CD player capable of MP3 disks designed for mounting in the PAS 100 option slots.
Wireless microphone receiver series offering flexible frequency selection and superior
performance designed for mounting in the PAS 100 option slots.
Page
10 of 35 Rev. 080505