Indel B TB32 Mode D'emploi page 12

ENGLISH
USE
(TB32 WITH MECHANICAL THERMOSTAT)
SWITCHING ON
To turn the refrigerator on, simply put the cable into the socket. If the power supply is cut off, the refrigerator
switch on automatically when the energy is on again.
SETTING THE INSIDE TEMPERATURE OF THE TB32
The temperature of the TB32 refrigerator can be set by turning the thermostat knob.
Turn the knob clockwise to lower the inside temperature, turn it counterclockwise to raise it. The refrigera-
tor automatically changes the revolution number according to the preset temperature and to the actual
inner temperature.
USE
(TB32 WITH ELECTRONIC THERMOSTAT)
- Plug in the DC or AC power. Press the button `ON/OFF` to run the TB 32. The LED display on the control
panel would be lighted and the interior temperature would be displayed.
- Press the button Δ and ∇ to adjust the temperature. Press the button Δ to increase while the button ∇
to decrease the temperature. When press the above two buttons at the same time, it would switch the
display between °C and °F.
- Press the ECO key to enter the "ECONOMY" operating mode: the ECO light turns on and the compressor
runs at minimum speed by keeping a fresh temperature inside the refrigerator. By pressing the ECO key
again, the light turns off and the refrigerator enters the automatic mode again (at max. speed, if required,
to reach the preset temperature).
12
TB32
TB32_05-09-2017