Polishing Teeth; Using The Accessories; Dental Mirror; Interdental Cleaner - Nevadent NZPS 3 A1 Mode D'emploi

Polishing teeth

NOTE
► We recommend using the appliance in front of a mirror so that you can guide the
appliance more confidently and avoid injuring your gums .
► It is normally sufficient to use the appliance twice a week . Use of the appliance
does not replace daily brushing with a toothbrush .
► Do not use appliance on your gums .
1) Add a little standard commercial toothpaste or a special polishing toothpaste to
the polishing cap 2 . Use the polishing cap 2 to spread the toothpaste onto the
area to be polished .
2) Press the operating button
3) Move the appliance in a circular motion up and down to polish the tooth .
Polish each tooth for approx . 20 – 30 seconds .
4) Release the operating button
appliance stops .
NOTE
► Never apply force when using the appliance . If you experience discomfort during
one polishing phase, move on to a different area .

Using the accessories

NOTE
► Do not use the accessories on your gums .

Dental mirror

Use the dental mirror 7 to discover stains or plaque in hard-to-reach areas . Preferably,
use the dental mirror 7 in combination with the appliance and the other accessories .

Interdental cleaner

Use the interdental cleaner 8 to remove contamination from between the teeth .
1) Guide the tip of the interdental cleaner 8 into the interdental space you want to
clean from the outside . As the tip is long enough, you do not need to clean the
interdental spaces from the behind as well .
2) Move the interdental cleaner 8 back and forth to clean the entire side surface of
the neighbouring teeth .
■ 8 │ GB │ IE │ NI
3 . The polishing cap 2 starts moving .
3 when you want to stop cleaning . The
NZPS 3 A1