Vacation And Moving - Whirlpool WRB551WNBS Guide D'utilisation Et D'entretien

3. Clean the exterior surfaces.
Painted metal: Wash painted metal exteriors with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately to
avoid water spots.
Stainless steel: Wash stainless steel surfaces with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately to
avoid water spots.
NOTE: When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching.
4. There is no need for routine condenser cleaning in normal
home operating environments. If the environment is
particularly greasy or dusty, or there is significant pet traffic in
the home, the condenser should be cleaned every 2 to
3 months to ensure maximum efficiency.
If you need to clean the condenser:
Remove the base grille.
Use a vacuum cleaner with a soft brush to clean the grille,
the open areas behind the grille and the front surface area
of the condenser.
Replace the base grille when finished.
5. Plug in refrigerator or reconnect power.
Defrosting
The No Frost system defrosts the freezer and refrigerator
compartments automatically. There is no need to defrost
manually.
IMPORTANT: It is normal for drops of water to collect on the back
wall of both compartments. Clean the drain opening regularly so
that the defrosted water can flow away and evaporate.
Cleaning the Drain
The drain opening is located on the bottom of the refrigerator
compartment, near the fruit and vegetable crisper drawer.
1. Unplug refrigerator or disconnect power.
2. Remove the cooler drawer (on some models) to access the
drain opening.
3. Locate the cleaning tool (provided) inside the drain opening.
4. Move the cleaning tool up and down inside the opening to
clear it of debris.
12
The lights in the refrigerator are LED which do not need to be
replaced. If the LED does not illuminate when the door is opened,
call Service to replace the light. See either the front cover or the
Warranty for contact information.

Vacation and Moving

Vacation
Short Vacation
There is no need to disconnect the refrigerator from the power
supply if you will be away for less than 3 weeks. Use up or freeze
perishable food.
If your model has an automatic ice maker:
Turn off the ice maker.
Shut off the water supply to the ice maker.
Empty the ice bin.
Long Vacation
If you are going to be gone for 3 weeks or longer, remove all food
and unplug the refrigerator.
To keep odor and mold from setting in, attach wooden or plastic
wedges to the upper edge of both doors with adhesive tape.
Open the doors enough so that air will circulate inside both
compartments.
If your model has an automatic ice maker:
Turn off the ice maker.
Shut off the water supply to the ice maker.
Empty the ice bin.
Moving
1. Remove all door bins, drawers and shelves.
2. Wrap the parts and secure with adhesive tape.
3. Raise the adjustable feet so they are no longer touching the
floor.
4. Close both doors and fasten with adhesive tape.
5. Tape the power cord to the refrigerator.
Lights