Weka HS40 Emma Instructions De Service page 13

6. M A I N T E N A N C E
ATTENTION: Always remove the mains plug from the supply socket before starting
maintenance or repair!
Clean the machine once the sawing work has been completed.
You can sprinkle the support carefully with a soft jet of water.
Never use a high pressure cleaner or even a steam cleaner.
Damaged cords and plugs have to be repaired or exchanged exclusively in an authorized repair station
(www.weka-elektrowerkzeuge.de).
If water runs out of the overflow-hole on the gear or on a different place, stop the machine immediately
and let it be repaired in an expert workshop.
The same is valid for the gear oil.
Let the water completely flow out of the system especially in the cold seasons - Danger of frost!
7. G U A R A N T E E
We will guarantee the WEKA hand saw for 12 months from the day of delivery. During this period we
will rectify material and production defects free of charge. This warranty does not cover normal wear and
tear, overloading, non-compliance with the operating instructions and intervention by unauthorized
persons or the use of parts from other companies.
8. D E C L A R A T I O N O F C O N F O R M I T Y
Description: Diamond hand saw - for cutting in concrete, stone and masonry
Type: HS40 (and versions)
from serial no.: 0113001
We hereby declare under our sole responsibility that this product conforms with the following
standards.EN60204-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN60745-1, in
accordance to the regulations of directive 2006/42/EG, 2004/108/EG, 2011/65/EU.
WEKA Elektrowerkzeuge
Auf der Höhe 20
D 75387 Neubulach
9. R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling (see sign on name plate). Please make sure
that the old tool does not get into the unsorted municipal solid waste, but that they are given
back to us, resp. abroad to our distributors.
Neubulach, 29.12.2009
Wilhelm Wurster, Owner
Übersetzung der Originalbetriebsanleitung - Subject to change without notice 0510
11