Using The Remote Control; Loading Batteries; How To Use The Remote Control - Sharp GS-XP07FR Notice D'utilisation

USING THE REMOTE CONTROL

LOADING BATTERIES

1
Remove the remote control
cover.
2
Insert batteries in the compart-
ment, making sure the ± and
— polarities are correctly
aligned.
• The display indicates "AM
6:00" when batteries are prop-
erly installed.
3
Reinstall the cover.
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the unit's signal receiver window and
press the desired button. The unit generates a beep when it receives the
signal.
• Make sure there is no
curtain or other object
between the remote control
and the unit.
• The remote control can
send signals from up to 7
metres away.
Use two size-AAA (R03) batteries.
Floor standing
E-6
Remote control
cover
-
+
+
-
Ceiling suspended