Parrot ASTEROID Classic Guide D'utilisation Rapide page 9

Radio
To select a frequency:
1. Press the SOURCE button until the
selected.
2. Press briefly the
manually the radio station. Hold down the
buttons to tune to the next available
radio station.
To get the list of all available stations:
1. Press the SOURCE button until the
selected.
2. Press the button and select Fullscan.
To memorize a station:
1. Press the SOURCE button until the
selected.
2. Select the frequency manually or in
3. Press the button then select
> To select a stored station, select the
mode.
iPod
Connect your iPod using the iPod connector then press the
SOURCE button until the iPod source is selected.
USB stor age device
1. Connect your USB storage device to the Parrot
ASTEROID Classic using the USB cable or the USB
Radio source is
connectors on the back of the car stereo
2. Press the
buttons to change
selected.
SD car d
1. Remove the Parrot ASTEROID Classic faceplate.
2. Insert the SD card into the appropriate slot with
Radio source is
the contact surface facing down.
3. Reattach the faceplate.
4. Press the
Analogue audio player
Radio source is
1. Connect the audio player using the Jack connector.
Fullscan mode.
2. Press the
Add to presets.
selected.
Presets
3. Start playing a song on your audio player.
button until the USB source is
button until the SD source is selected.
button until the Line in source is
Audio player connected via Bluetooth
You can use the Parrot ASTEROID Classic to listen to
songs stored on your mobile phone or Bluetooth audio
device. To do so, your phone / audio device must
support the Bluetooth A2DP profile (Advanced Audio
Distribution Profile).
If you are using a Bluetooth audio player for the first
time, you have to pair both devices.
If both devices are already paired:
1. Press the button until the
source is selected.
2. Start playing a song on your audio player.
Bluetooth Audio
English 6