GEBUWIN WW2000 /D/Ex Série Mode D'emploi page 15

5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates
heavily
The load cannot be held
The load pressure brake does
not function
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer.
The exploded view diagram with regard to the servicing parts is available on the internet website:
www.gebuwin.com
Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only; correct functioning cannot otherwise be guaranteed!
7. Environment
At the end of the winch's lifespan, the various winch parts must be disposed of according to the
current environmental regulations.
8. Guarantee
Gebuwin BV guarantees for a period of 2 years the materials and workmanship of the GEBUWIN hand-driven
winches.
Cause
- no grease on the gearing
dirt on the gearing
-
during mounting the winch has
-
pulled askew
- the cable has been incorrectly
wound round the drum which
means the crank turning
direction is incorrect
- the brake discs are either worn
down or faulty
braking mechanism and/or discs
-
are jammed due to infrequent
use
Solution
- apply grease
clean with a detergent and re-
-
grease
level the mounting surface and re-
-
mount the winch
- wind the cable correctly around
the drum
- check and/or renew the brake
discs
loosen the brake by hitting the
-
crank in the correct turning
direction with the flat of the hand
14