GE 26 Manuel D'utilisation Et D'installation page 20

INSTALLING THE REFRIGERATOR
REPLACING THE FREEZER DOOR
8
Hang the freezer door front onto open slots
B
on the sides.
Tighten screws completely. (There are four 10 mm
C
hex-head bolts.)
REPLACE THE FREEZER BASKET
Replace the freezer basket by lowering it into the frame.
Installation Instructions
(cont.)
Slot
(cont.)
REPLACING THE FREEZER DOOR
8
REPLACE THE FREEZER BIN
Hook the ends of the freezer bin into both brackets,
and push down until they lock into place. (See page 10.)
CONNECTING THE REFRIGERATOR
9
TO THE HOUSE WATER LINE
A cold water supply is required for automatic icemaker
operation. If there is not a cold water supply, you will
need to provide one. See Installing the Water Line
section.
NOTE: Before making the connection to the refrigerator,
be sure the refrigerator power cord is not plugged
into the wall outlet.
If you are using copper tubing, place
A
a compression nut and ferrule (sleeve) onto
the end of the tubing coming from the house
cold water supply.
If you are using the GE SmartConnect
tubing, the nuts are already assembled
to the tubing.
20
(cont.)
™