Troubleshooting; Technical Data - Caffitaly System Professional S16 Mode D'emploi

PROBLEM
Coffee does not come out.
The indicator
D blinks RED.
The coffee is not hot
enough.
The lever cannot be
lowered.
The indicator D is lit up
RED steady.
When a button is pressed
to dispense coffee, the
machine seems to work
but then stops without
dispensing any coffee, or
only dispenses a small
amount.
Coffee is dispensed very
slowly, and is of poor
quality.
See the data plate on
the base of the machine
1,2 litres
room temperature:
10°C ÷ 40°C
375 mm
175 mm
English

Troubleshooting

POSSIBLE CAUSE
The water tank is empty.
- Cold cups / espresso cups.
- Scale build-up in machine.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
Heating problems.
Incorrect quantity
programming.
Button C was used with an
espresso capsule.

Technical data

About 4 kg
Max. 15 bar
< 70dB A
8 capsules
275 mm
SOLUTION
Fill the tank with fresh water. Press
a button to refi ll the circuit. When
the buttons remain lit up steady, the
appliance is ready to use.
- Preheat cup.
- Descale.
- Empty out the used capsule drawer.
- Remove the used capsule.
Turn off the machine, then turn it back
on. If the problem persists, take the
machine to an Authorised Service
Centre.
Reprogram the quantity associated with
that button.
See the section "Programming the
quantity of coffee in a cup".
Use buttons A or B.
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
370 mm
21