Skil HT4222B-00 Guide D'utilisation page 6

Check the blade and motor mounting bolts at frequent intervals for proper tightness .
Also, visually inspect blade for damage (e .g ., bent, cracked, and worn) . Replace the
blade only with identical SKIL replacement blade .
Replace the blade if it is bent or cracked . An unbalanced blade causes vibration that could
damage the motor drive unit or cause personal injury.
If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause . Vibration is generally a warning of trouble.
The trimmer shall be used to cut stems less than 3/4" (19mm) thick .
Trim only in daylight or in good artificial light .
Remove or disconnect battery before servicing, cleaning, or removing material from the
hedge trimmer .
Do not wash with a hose; avoid getting water in motor and electrical connections .
When servicing use only identical replacement parts . Use of parts which do not meet the
original equipment specifications may lead to improper performance and compromised safety.
Follow instructions for lubricating and changing accessories .
Keep handles dry, clean and free from oil and grease .
Do not expose a battery pack or tool to fire or excessive temperature . Exposure to fire
or temperature above 212 °F (100°C) may cause explosion .
Save these instructions . Refer to them frequently and use them to instruct others who
may use this tool . If you loan this tool to someone else, also loan these instructions to
them to prevent misuse of the product and possible injury .
SAVE THESE INSTRUCTIONS!
6