Cleaning And Maintenance; Recommended Charge Leads, Polarity; Charger Controls - GRAUPNER SJ MULTILADER 9E Instructions D'utilisation

to deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use
and operation of our products, or which are connected with such operation in any way.
The charger is entirely maintenance-free in use, and requires no servicing of any kind. Ho-
P
wever, it is in your own interests to protect the unit from dust, dirt and damp!
To clean the charger, disconnect it from the car battery and any other battery, and wipe it
P
clean with a dry cloth (don't use cleaning agents!)
7. Recommended charge leads /polarity
The requirements made on rechargeable batteries vary greatly according to their particular applicati-
on, and this in turn calls for different types of battery connector. Please note that connectors, connec-
tor names and polarities may vary from one manufacturer to another. For this reason we recommend
that you always use genuine matching connectors of identical construction. The following charge
leads are suitable for battery charging with this unit:
Japan
Order No. 3371
Be sure to use genuine charge leads fitted with cable of adequate conductor cross-section.
Balancer connector
EH for Graupner
LiPo selec-
tion LED
LiXX charge
indicator LED
Selection key
LiPo/LiFe
Charge outputs LiPo/
LiFe batteries
Operating Manual Multilader 9E

6. Cleaning and maintenance

G2 (AMP/G2,5)
Order No. 3011 Order No. 3037

8. Charger controls

BEC
Order No. 3021
Charge putputs
NiCd/NiMH batteries
∆peak detection
JR JR-Sender
Order No. 3022
Mains switch
Charge indicator LED's
POWER-LED
Mains cable
100~240 V AC
power supply
Charge outputs NiCd/
NiMH/Pb-batteries
(backside)
for internal
21