Publicité
using your dishwasher
CONTROL PANEL
DW80M3021 Series
1
POWER
1
Cycle Selector
2
Hi-Temp Wash
3
Sanitize /
4
(Control Lock)
Display
5
DW80M3021_DD81-02549A-00_EN.indd 8
DW80M3021_DD81-02549A-00_EN.indd 8
2
3
4
When you press the POWER button, the Cycle On light for the most recently
started cycle turns on. When the selected cycle is complete, the dishwasher
powers off automatically.
Select the appropriate wash cycle depending on the soil level of your dishes.
After you select a cycle, the cycle on light for that cycle lights up.
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
The temperature rises to 163 ˚F (73 ˚C) in the fi nal rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and
then remains illuminated until the Sanitize option ends. When you press the
POWER button, the "Sanitize" lamp turns off.
The Normal cycle with the Sanitize option selected is NSF certifi ed.
The Sanitize feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certifi ed residential dishwashers are
not intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the panel.
To lock and unlock the buttons on the control panel, hold the Sanitize
button down for three (3) seconds when power is On.
Displays cycle time and remaining hours and minutes, Delay Start hours, and
Information codes. If a problem occurs during operation, an information code
appears with a warning sound. Refer to the information codes page.
Control Lock indicator
-
Turns on if the Control Lock is set (or the dishwasher is in the standby
or pause modes).
-
Turns off while the dishwasher is operating.
-
When Control Lock is on, the Control Lock indicator blinks for several
seconds if any button except the POWER button is pressed.
Rinse Refi ll indicator
-
Turns on if the dishwasher runs out of rinse aid.
Delay Start indicator
-
Turns on if you set Delay Start (including the time range).
-
Turns off when the set time range of Delay Start has ended.
English - 8
5
6
7
2017-08-02
2017-08-02
2:42:42
2:42:42
Publicité
