Publicité
using your dishwasher
CYCLE SELECTOR
DW80M3021 Series
1
2
3
Auto
1
Normal
2
Heavy
3
Express 60
4
BASIC GUIDELINES FOR OPERATION
1. Open the door and load your dishes (see page 14).
-
Remove any food remains from the dishes before placing them in the rack(s).
-
Place dishes into the upper and lower racks.
-
After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the
dishes will interfere with them.
-
Make sure the dishes will not prevent the detergent dispenser from opening.
2. Add detergent to the dispenser (see page 17).
-
Make sure to use only automatic dishwasher detergent.
-
Refer to "Using detergent" on how to add detergent.
3. Press the POWER button.
-
When you press the POWER button, the cycle light of the most recently started cycle lights up.
-
If "Rinse Refi ll" (
drying performance.
4. Select an appropriate cleaning cycle depending on the soil level of the dishes (see pages 10
and 21).
-
Press the appropriate cycle button.
-
When you press a cycle button, the cycle indicator light is illuminated.
-
For information about selecting a cycle according to the soil level of the dishes, see "Cycle
selector" on page 10.
5. Press the START button, and then close the door.
-
After you close the door and press the START button or you press the START button and close the
door, the dishwasher starts the selected cycle after a few seconds.
DW80M3021_DD81-02549A-00_EN.indd 10
DW80M3021_DD81-02549A-00_EN.indd 10
4
This cycle detects the level of soil and automatically initiates the optimal cycle
after a few minutes of operation.
Use this cycle for normally soiled dinner dishes.
Use this cycle for heavily soiled dishes and dishes with heavy soil.
Use this cycle for lightly soiled dishes.
) is illuminated, you should refi ll the rinse aid dispenser to improve washing and
English - 10
2017-08-02
2017-08-02
2:42:43
2:42:43
Publicité
