Publicité
To Assemble Front Wheel & Attach Wheel Cover
Spring
Loaded
Buttons
2
3
Spring
Loaded
Buttons
4
5
All manuals and user guides at all-guides.com
1
2
3
4
5
7
Place stroller back on handle bar.
Slide front wheel assembly onto frame.
NOTE: Make sure that spring loaded
buttons pop through frame. If your
spring loaded button becomes out of
place, take pliers and feed button into
hole.
CAUTION: If spring loaded buttons DO
NOT pop through, front wheel assembly
could fall off during use.
Secure front wheel assembly to the front
frame tubes using 12mm screws. The
screws should be aligned into the 2
holes closest to the spring loaded but-
tons. Secure with a Phillips screwdriver
on both sides.
Align bosses underneath wheel cover to
the two holes on the metal frame. If
bosses DO NOT line up, wheel cover on
front wheel is not on correctly. Repeat
steps 1-3. If you are still having trouble,
call customer service for assistance.
Secure wheel cover into remaining holes
underneath frame by basket with 16mm
screws using a Phillips screwdriver.
Repeat for second side.
Publicité
