Publicité
Assembly Instructions
6
7
H
G
1
8
H
G
2
D
G
2
3
G
1
3
G
Hold back the collar at one end of the end of the hose
(G). Push firmly to connect hose fitting to the water outlet
tube on the front of the power washer unit (D). Twist the
collar clockwise to secure. Confirm hose is locked into
the water outlet by slightly pulling on the hose.
Note: DO NOT use pliers or locking pliers to tighten.
Hold back the collar at the other end of the hose (G). Push
firmly to connect hose fitting to spray gun (H). Twist collar
clockwise to secure. Confirm hose is locked into spray gun
by slightly pulling on them.
To remove the hose, twist collar counter clockwise then
pull back to release the hose (G) connection from the
spray gun (H).
8
Publicité
