Publicité
Operating Instructions
Using the Foam Cannon
1. Unscrew fluid tank from foam cannon valve assembly.
2. Fill fluid tank with water (for best results, use warm
water.)
3. Add 1-3 ounces of your favorite detergent to the fluid
tank.
4. Attach fluid tank to foam cannon valve and attach
assembly to the gun. Use the control knob to change the
flow of soap + (more) or - (less).
5. When finished, run clean plain water through the
pressurized foaming system to purge soap from the
internal components.
Flush with hot water for added cleansing power.
Care and Maintenance
Detergents
• Use detergents designed for power washers. Hardware
stores or home centers may offer detergents for
different cleaning projects. The cleaning solution
should be the consistency of water in order to prevent
detergent bottle and spray tip from clogging.
• ALWAYS spray detergent on a dry surface.
• DO NOT pre-soak area. Wetting the surface first dilutes
the detergent and reduces its cleaning ability.
• DO NOT allow detergent to dry on surface. On vertical
surfaces, apply detergent to lower surfaces first and
work your way up to prevent streaks in the dirt and
grime. Rinse detergent by pressure washing from
bottom up for same reason.
• For tough stains, it may be necessary to reapply the
detergent and use a bristled brush to scrub the stain.
Subsequent power washing after brushing should
successfully remove dirt.
Cleaning Garden Hose Adapter
The screens inside the garden hose adapter should be
cleaned periodically.
1. Rinse with clean water.
2. Place back into the adapter.
12
Publicité
