Mitsubishi Electric City Multi PLFY-P NBMU-E Série Manuel D'installation page 10

4. Electrical work
< Process for setting >
[1] To turn off air conditioner and change the remote
controller to "Fixed airfl ow direction mode"
1.Press ON/OFF button to turn off the air conditioner.
1
2.Press Fan Speed button and Filter
2
simultaneously and it becomes the fi xed airfl ow direction mode after a while.
"Fixed airflow direction mode" display
Air blows downward after it becomes
"fixed airflow direction mode"
[2] To select and identify the outlet to set
1.Press Set Temperature button to change number with the outlet No. blinking.
5
Select outlet No. to set.
Up/Down air direction Address No. of indoor unit
Outlet No.
Outlet No.3
Outlet No.2
2.Press Filter button to send the information on remote controller.
3
3. Wait for 15 seconds . How does the air conditioner run?
→
Only the air from the selected outlet blows downward.
→ Go to step[3].
→
Air from the wrong outlet blows downward.
→ Repeat 1 and set again.
→
All outlets are closed.
→ The number of the air conditioner (Address No. of indoor unit) is wrong.
Refer to How to fi nd air conditioner No..
[3] To fi x air direction
1.Press Mode button (Return button)
2.Press Set Temperature button until the direction to set is chosen.
5
3.Press Filter button to send the information on remote controller to air
3
conditioner.
4.Wait for 15 seconds . How does the air conditioner run?
→
Airfl ow direction is set in the selected direction.
→ The fi xed setting completed (Go to step [4].)
→
Airfl ow direction is set in the wrong direction.
→ Repeat 2. and set again.
Up/Down air direction
Outlet No.
Air direction changes
This indicates NO FIXED SETTING(canceled)
10
button for more than 2 seconds
3
Outlet No.4
MITSUBISHI
ELECTRIC
label
Outlet No.1
Note: "0" indicates
all outlets.
to blink Up/Down air direction indicater.
4
Address No. of indoor unit
[4] To cancel "Fixed airfl ow direction mode"
1.Press ON/OFF button to cancel "Fixed airflow direction mode".It is also
1
canceled by pressing Fan Speed button
2 seconds simultaneously.
2.Do not operate remote controller for 30 seconds after the "Fixed airfl ow direction
mode" is canceled. It does not accept even if it is operated.
and Filter button for more than
2 3