Publicité
ATTENTION! It is absolutely necessary TURN OFF THE HEATING (both led off) WHEN
THE TABLE IS NOT USED AND AT THE END OF EACH WORKING DAY.
The heating works with the pressure of the body, so we do not feel any sensation of heat if it is not stressed
by the weight of a body. It is recommended to always leave a weight laid (for example towels or magazines)
to maintain the minimum temperature.
6.2. Arm rests
To assemble the arm rests, place them in the predisposed support and screw the knobs in the clutches
situated on both sides near the backrest.
6.3. Arm support
To install/remove the arm support, unscrew the knob situated
under the backrest.
6.4. Wheels
You can install the braked wheels on the table by unscrewing the 4 small adjustable feet.
ATTENTION! Always block the brake of each wheel before the client sit on the table.
6.5. No hole head rest
Remove the face hole head rest cushion from the wooden support
(it is fixed by Velcro®) and place the cushion without hole.
7. INSTRUCTION FOR USE
7.1. Operator
The table is controlled by an operator through the foot pedal control; the operator must position themselves
so as to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the table the operator should always remain
in the vicinity of the controls; it is forbidden to leave the table unattended during its
operation.
Operators should pay attention to avoid creating potentially dangerous situations for
their own or other's safety.
All the people working on the table must be properly trained on the correct methods
of work and informed about its proper functioning. They also need to be aware of the
parts of this documentation relevant to their work.
10
All manuals and user guides at all-guides.com
Knob
Arm support
No hole
cushion
Wooden
support
Publicité
