Bosch GWS 18V-8 Professional Notice Originale page 10

10 | English
Technical Data
Angle Grinder
Article number
Rated voltage
A)
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
KickBack Control
Restart protection
Soft start
B)
Weight
Recommended ambient temperat-
ure during charging
Permitted ambient temperature dur-
C)
ing operation and during storage
Compatible rechargeable batteries
Recommended rechargeable batter-
ies
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V 12.0Ah
B) Depends on rechargeable battery (4), protective guard ((12), (11)) and auxiliary handle ((8), (9)) in use
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Kickback control
If there is a sudden kickback in the power tool,
e.g. jamming in a separating cut, the power
supply to the motor will be interrupted elec-
tronically.
To restart the tool, set the On/Off switch (7) to
the "off" position and then switch the power tool on again.
Restart protection
The restart protection feature prevents the
power tool from uncontrolled starting after the
power supply to it has been interrupted.
RESTART
PROTECTION
To restart the tool, set the on/off switch (7) to
the off position and then switch the power tool
on again.
Soft start
The electronic soft start limits the torque when the power
tool is switched on and increases the service life of the mo-
tor.
1 609 92A 9LG | (28.05.2024)
GWS 18V-8
3 601 JN9 0..
V= 18
–1
min 11000
mm 100
M 10
mm 10
●
●
●
kg 1.8–3.1
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GBA 18V... ≥ 4.0Ah
ProCORE18V... ≥ 4.0Ah
GAL 18...
GAX 18...
GAL 36...
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
GWS 18V-8
3 601 JN9 0..
18
11000
115
M 14
22
●
●
●
1.9–3.2
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GBA 18V... ≥ 4.0Ah GBA 18V... ≥ 4.0Ah
ProCORE18V... ≥ 4.0Ah ProCORE18V... ≥ 4.0Ah
GAL 18...
GAX 18...
GAL 36...
GWS 18V-8
3 601 JN9 0..
18
11000
125
M 14
22
●
●
●
1.9–3.3
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools