Disposal; Technical Data - Conrad TOOLCRAFT TCMW 20-LI Solo Mode D'emploi Original

11. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product according to the relevant statutory regulations. Dispose of the battery
as specified in the relevant original operating instructions.

12. Technical data

Rated voltage ......................................................................... 20 V/DC
Suitable rechargeable batteries (not included) ....................... TOOLCRAFT 20 V/4.0 Ah Li-ion TCEA20-LI 4.0
Suitable charger (not included) ............................................... TOOLCRAFT 20 V Li-Ion TCSL 20 V-LI 2.2
Suitable insert tools ................................................................ e.g. item no. 1574786
Rated idling speed n .............................................................. 5000-18000 min
0
Weight .................................................................................... 0.95 kg
Sound pressure level L
Sound power level L ............................................................ 92.8 dB(A)
WA
Standard deviation K .............................................................. 3 dB (A)
Vibration level (in accordance with EN 60745) ....................... 4,657 m/s²
Uncertainty K .......................................................................... 1.5 m/s²
Dimensions ............................................................................. 270 x 90 x 65 mm
Operating conditions ............................................................... 0 to +40 °C / 30-85% relative humidity
Storage conditions .................................................................. 0 to +40 °C / 0-85% relative humidity
Warning!
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders to prevent hearing
damage.
The vibration emission value stated in this manual was obtained using a standardized EN 60745 test pro-
cedure. The result can be used to compare vibration levels of different electrical tools. It can also be used
to obtain a preliminary estimate of your exposure to vibrations.
The specified value indicates the vibration level when the tool is used for its intended purpose. The actual
vibration level may differ from the specified value if the tool is used for other purposes, if other tools are
used, or if the tool has not been serviced properly. These factors can considerably increase your exposure.
For an accurate estimate of your exposure, account for the times when the stapler is switched off or not in
use. These factors can considerably reduce your exposure.
Take additional safety measures to protect the user against the effects of vibration, e.g.: Maintenance of
electric tool and insertion tools, keeping your hands warm, organisation of work processes.
28
........................................................ 81.8 dB(A)
PA
TOOLCRAFT 20 V/2.0 Ah Li-Ion TCEA 20-LI 2.0
-1