Assembly; Attaching/Replacing Insertion Tool - Conrad TOOLCRAFT TCMW 20-LI Solo Mode D'emploi Original

7. Assembly

Always remove the battery before attempting any installation or adjustment work or changing tools or ac-
cessories. Inadvertent operation of the on/off switch (2) can otherwise cause injury.
a) Attaching/replacing insertion tool
All commercially available insertion tools with
the tool holder shape shown in the illustration
can be used. Suitable insertion tools may be
found using our item no. 1574786
• Open the quick release (1).
• The tool holder (5) is now unlocked.
• Insert the required tool into the tool holder (5).
24