Belkin F5D8055 Guide D'utilisation page 36

USING THe BelKIN WIreleSS NeTWorKING UTIlITY
section
table of contents
WeP Setup
64-Bit WEP Encryption
1. Select "WEP" from the "Data Encryption" drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually.
A hex (hexadecimal) key is a combination of numbers and
letters from A–F and 0–9. For 64-bit WEP, you must enter 10 hex
characters.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3. Click "Save" to finish. Encryption in the wireless router (or access
point) is now set. Each of your computers on your wireless network
will now must be configured with the same security settings.
WArNING: If you are using a wireless client to turn on the
security settings in your wireless router (or access point), you will
temporarily lose your wireless connection until you activate security
on your wireless client. Please record the key prior to applying
changes in the wireless router (or access point). If you don't
remember the hex key, your client will be locked out of the wireless
router (or access point).
N+ Wireless USB Adapter
1 2 3 4 5 6
34