Publicité
Preparation for take-off
Connection in the harness
Once the pre-flight completed, it is time to settle in the
harness correctly:
- Put on one leg, then the other.
NOTE: It is possible to open the left thigh for easy donning
(Steps 1 to 3).
1
Step 2
Step 1
1
Step 3
- Close the kocon, using the "Konnect" buckle which also
incorporates the connection of the left reserve riser (see page
45).
2
- Finalize closing the cocoon using
the plastic clip.
3
Despite the presence of an anti-forget system, it is essential to pay
Despite the presence of an anti-forget system, it is essential to pay
particular attention during the attachment phase in the harness.
particular attention during the attachment phase in the harness.
Just as much as the harness settings, the pilot's take-off gestures are
Just as much as the harness settings, the pilot's take-off gestures are
crucial for ease of installation.
crucial for ease of installation.
More detailed information is available at www.korteldesign.com
More detailed information is available at
50
KOLIBRI EVO
2
3
www.korteldesign.com
Publicité
