Publicité
Pans do not
become hot.
The induction hob
or a cooking zone
has turned itself
off unexpectedly,
a tone sounds, and
an error code is
displayed.
Failure Display and Inspection
If an abnormality comes up, the hob will enter the protective state automatically
and display corresponding protective codes:
Failure code
F3/F4
F9/FA
E1/E2
E3
E5
IGBT: Insulated Gate Bipolar Transistor
The above are the judgment and inspection of common failures.
Please do not disassemble the hob by yourself to avoid any dangers and damages
to the hob.Spill Protection
120
The induction hob cannot
detect the pan because it
is not suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking zone
or not properly centered on it.
Technical fault.
Problem
Temperature sensor of the
induction coil failure
Temperature sensor of the
IGBT failure
Abnormal supply voltage
High temperature of the
induction coil temperature
sensor
High temperature of the IGBT
temperature sensor
FR
NL
Use cookware suitable for induction
cooking.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
Please note down the error letters
and numbers, unplug the induction
hob,
and
contact
technician.
Solution
Turn off the hob, and restart after
cooling for 30 minutes.
Contact the after-sales service.
Inspect whether power supply is
normal and then turn the hob on.
Turn off the cooking zone, and restart
after cooling for 30 minutes.
Restart after the hob cools down.
EN
PT
a
qualified
Publicité
