Publicité
ASSEMBLY
INSTALLING THE LOWER HANDLE (See Figure 3.1)
• Insert the lower handle (2) into the housing hole. Place rubber pad (1) between the housing
and lower handle. Slide cord retainer onto lower handle.
• Using the supplied screws (3), fasten the lower handle to the housing using a star-shaped
screwdriver, not supplied.
INSTALLING THE UPPER HANDLE (See Figure 3.2)
• Position the upper handle so the holes line up with the lower handle holes.
• Insert the supplied carriage bolt (1) through the hole from the outside of the handle bar.
• Thread the knob (2) onto the carriage bolt to tighten securely into place.
Fig. 3.2
Fig. 3.1
12
2
1
3
2
1
Fig. 3
Publicité
