Publicité
4. Picture G1 Concept
- operating elements
1 - mains cable
2 - mains switch
3 - fuse
3,15A/T 220V (6,3A/T 100V-115V)
4 - point laser
5 - power contol lamp
6 - drilling table
7 - operation plate
8 - adjusting screw for drilling depth gauge
9 - adjusting hexagon screw for table angle
10 - adjustable stand
11 -
extractor socket for external
dust suction
14 - hexagon key SW06
15 - hexagon key SW03
5. Setting up
Unpack the G1-Concept and check if complete
Check whether power data with the information
on the identification plate (12) corresponds
Power plug (14) in mains socket or in the external
suction socket. Plug in the tube of the external suction (7)
Open the hexagon screw (9) in the stand (10) with the
attached key (14) and adjust the working angle
Close again the hexagon screw (9)
4
5
6
7
8
9
14
3
2
1
11
10
15
Publicité
